Open Dental Forum

tomle

so the solution is

in VS2019, click Tools -> NuGet Package Ma..
then, search for Mono.Cecil, and click install
do the same for MySql.Data

Regards,

tomle

****************** Severity Code Description Project File Line Suppression State Error NuGet Package restore failed for project UnitTests: Unable to find version '0.10.3' of package 'Mono.Cecil'. C:\Program Files (x86)\Microsoft SDKs\NuGetPackages\: Package 'Mono.Cecil.0.10.3' is not found on source...

tomle

I set the target to v142 and the error is gon.

tomle

Hi all,

I have the same problem with OD 22.4.5 with VS2019.

What is the solution?

Thanks

tomle

Hi All,

My last compile for this was in Feb. 2014, so very rusty.

Can you someone point me to the latest document regarding compiling the latest OD?

Thank

tomle

Hi OD, I was able to compile the v21.4.15 in both Release and Debug, and tried to import the Canada - BCDA 2022 fee guides based on the info on your website below, but got the error "Invalid registration key format" We never had this problem before. Please advise! Regards, ================ British C...

tomle

Hi,

I checked out the v21.4.15 from github, and compiled fine in Debug mode, BUT, when switched to Release mode, there are error with ODR.dll, and other.

Any idea?

Thanks

tomle

Hi,

I got error "Could not fine FormGmailSettings.cs...." when compile version 21.4.

Any idea?

Thankx

tomle

Hi Jordan,

What version of VS2019 are you using?

Thanks

tomle

Hi All,

Is VS2017 ok to use to compile OD 21.3+

Thanks

tomle

SORRY!!!! I meant Compiled V21.3

Thanks

tomle

Does anyone have the Pre-Compile V21.3 I can download?

Thanks

tomle · Re: what software are required OD 16.4/17.1 Thanks Chris, I will try that.

Thanks Chris, I will try that.

tomle

Hi All, I have VS2012 Ultimate installed and it compiled fine with OD 15.4 target .net framework 4. But it won't compile OD 16.4/17.1. When I open the 16.4 sol file, it complaint about the .net target framework 4.5 is not installed, but the framework 4.5, 4.5.2 (multi target pack, etc..) and 4.6.1 a...

tomle

Hi,

Does anyone know of a way for me to print a receipt that has only the payment and the balance? Nothing else! eg. no discount, or write off, or procedure code, etc...

Thanks

tomle

Hi Jason,

Where does this paymentType01 define? In SheetFiller.cs?

Thanks

tomle

btw,

This will produce 3 sections in the report, all production income in the beginning of the report, then 2nd section is for writeoff and adjustment, then 3rd is for payment.

tomle

Hi All,

I would like to have the type of payment in the deposit slip printout. Any idea how to achieve this? I tried the edit sheet, but the Deposit Slip sheet does not have the payment type.

Thanks

tomle

So I was able to make the change to create production report to display in chronological order rather than by lname. in RunDaily() -- at the begining of the query //----------------- 653: //+DbHelper.DateColumn("procedurelog.ProcDate")+" procdate," 654: +"procedurelog.DateTStamp procdate," //-------...

tomle

Hi Jason,

Yeah, that is what the user is telling me, that Pacific Blue Cross only accepts "B", and not "V" or "F", etc.. So if you have MV, it will reject the claim. Strange..

tomle

Hi Allen,

The AptNum attribute is in the procedurelog table, but not in other tables, eg. claimproc, paysplit, payment, etc.., that forms the hug UNION ALL query, which uses PayDate, ClaimDate, etc..

Do you know of anyone has done this before?

Thanks

tomle

Hi All, Pacific blue crosss in Canada does not accept claim treatment surface, V and F. So do most canadian insurance carriers. In OD, if the tooth is Anterior, then OD will not accept "B" surface treatment. How do I get around this problem? My Language and Location is English(Canadian) and Canada. ...

tomle

Hi All,

Does anyone know how or where I can change, so that the Daily Production and Income Report is sorted base on the patient's appointment completion, rather then by Alphabetical order of Patient Name?

Thanks

tomle

I have been using SuniRay2 and they are very good. With the sensor lower cost, and one time cost for ProfSuni software, they are great with OD.....

tomle

I used them with Apteryx, and they worked fines. Schick CDR, and support suck, who in the world uses a separate SQL Server database to keep track of their software info, etc... Upgrade to a new windows OS will be a nightmare.

tomle

Hi all canadian offices When I attached a lab fee, $100, (99111) to a procedure (14611) and started a new eclaim, only the procedure (14611) get the insurance estimate, and the lab fee is assigned to patient portion. Because of this, the patient now owes $100 instead $20, patient has 80% insurance c...

tomle

Hi all canadian offices When I attached a lab fee, $100, (99111) to a procedure (14611) and started a new eclaim, only the procedure (14611) get the insurance estimate, and the lab fee is assigned to patient portion. Because of this, the patient now owes $100 instead $20, patient has 80% insurance c...

tomle

Yes, I sent bill and received payment fine. But sometimes we sent the wrong procedure code, which we would like to reverse.

thanks

tomle

Hi,

I compiled the latest version 11.1.16 and when I clicked on a sent claim trying to reverse it. The reverse button is greyed out. I looked up in the manual, but I can't see any reference to eclaim reversal.

Am I missing something? maybe RTFM!!!!!

Thanks

Tom

tomle

Thanks.

tomle

Hi Jordan, I have another problem with canadian eclaim, the attached lab fee was not added into the total for the insurance. For example In account module, when I clicked on each of the completed procedure 27211 (crown) - $750 - ins est.(50%) = $375 99111 (lab fee) - $325 - ins est (90%) = $ $292.50...

tomle

I think this problem is on my fee schedule. Before the eclaim, I created the code 99111 as procedure code instead of lab fee code, and also I used the canadian.zip file for my database back in 2009, which somehow has the lab fee set to the code 14611. Is it ok for me to go into mysql and change the ...

tomle

Hi Derek,

The isLab check box is greyed out. Also when I created a new procedure code, there is no isLab checkbox, only isProth... and others.

Any idea how to enable the isLab checkbox?

Thanks

Tom

tomle

Hi, The error is gone doing the way Derek suggested. But the order of lab and procedure code was reversed. In the newly created claim, the lab was shown as procedure with lab related description and the procedure price was in the lab column. Maybe it is in my schedule. I have to checked it tomorrow....

tomle

Hi Jordan, If I selected the procedure code 14611 alone and tried to create a new claim, I got this error.... System.IndexOutOfRangeException: Index was outside the bounds of the array. at OpenDental.ContrAccount.CreateClaim(String claimType, List`1 PatPlanList, List`1 planList, List`1 ClaimProcList...

tomle

Hi, I am using version 11.0.41. Before the upgrade, we were able to add the procedures, then created the claim and set the status to sent, as we sent it through the 2nd system; then, once we received the payment, we were able to pay it. Now with this version, we cannot even create a new claim for it...

tomle

Hi,

I tried to send a pre-auth Candaian eclaim for 2 procedures, 99111 and 14611(appliances), but OD popped up a message saying

"number of lab fee procedures unselected: 1"

I selected both procedures but the pre-auth only selected the 99111 code.

Any idea?

Thanks

tomle

Hi Jordan,

Take a look at this database, http://www.postgresql.org/

It has been around since 2000 and it is very good.

tomle

Hi Jordan, I should stopped working on it as well, since we should not duplicate our effort. If you need me to help with the programming, let me know. Do you have the message and the format books from CDANet? I have them in PDF format as well as printed books, if you want I can send it to you. Let m...

tomle

Hi,

Thanks for the info. I think the users are trying to set the software same as how to write on their chart.

tomle

Hi Jordan,

Yes. What is the ETA? So I can tell my potential users. For work around, I asked my users to use commlog feature, since it has the creator name attach it.

tomle

Hi,

Is there a way to set a specific color of text to a specific provider? eg. green text color is hyg, and red is for dentist.

Thanks.

tomle

Hi Jordan,

Ok, I saw the code flow now. So to see the schedule date for next recall, the procedure has to be attached to the appointment?

Thanks.

tomle

Hi, It is from the V 6.8.19 source code. I just followed the code to see why the SchedDate in the Recal panel of the Family module was not showing the date of the next recall when the Hyg booked an appoinment. >Seems like it would be if the procedure is attached to a future appt. Ah. Got it. where w...

tomle

Hi Jordan, The query below that retrieves the appointment date is not return any result because the where clause "WHERE appointment.AptNum=procedurelog.AptNum" is not equal since the procedurelog.AptNum is always 0. SELECT recall.*,(SELECT MIN(appointment.AptDateTime) FROM appointment,procedurelog,r...

tomle

Hi Jordan,

This problem is still there in V 6.8.19. Any idea?//

Thanks.

tomle · Re: com port problem with Canadian EDI and OD Hi, I am using version 6.5.22.

Hi,

I am using version 6.5.22.

tomle

Hi Jordan,

I put the EDI on a separate PC and we sent out 10 claims without any problems.

Thanks.

tomle

Yes, it is within the edit window. I think I will put our EDI on a separate PC just to handle the EDI.

tomle

Hi Jordan,

I think it is OD that cause it. When I clicked on sent-verified-> ok, not "Send", the modem tr light is up, and my EDI program gets the Can't Open Comm Port error message.

Any idea?

Thanks.

tomle

Hi All, I have an interesting problem and not sure how to solve with OD. I have one patient with 2 insurance plans from the same company, pacific blue cross, and the patient's plans have the same subscriber's ID, but diff. group numbers. When I added in the 2nd plan's benefits, which is different fr...

tomle

Hi Jordan, The com port problem is still there. There were 4 out of 11 submissions that the com port could not be open, and each time we had to close down OD for the EDI program to open the com port again. I also removed all clearinghouse entries, and added a dummy one that did not use the EDI softw...

tomle

Hi Jordan, Yes, every time our EDI software was not able to get the dial tone on the modem, and the CCD32 log reported that "error in opening com port 1", shut down OD will get the EDI program to dial again. The receptionist used to reboot the machine, and the EDI will work once and hang, but reboot...

tomle

Hi all, I have a problem with OD that causes me a big problem, and I don't know how to fix it. I compiled version 6.5.27 as a release version, and I ran into a com port conflict with our Canadian EDI program. We are using double entry method for work around with Canadian eclaim, but when we run both...

tomle

Hi all, I have a problem with OD that causes me a big problem, and I don't know how to fix it. I compiled version 6.5.27 as a release version, and I ran into a com port conflict with our Canadian EDI program. We are using double entry method for work around with Canadian eclaim, but when we run both...

Search found 55 matches